ياباني ، يقوم بعمل بانوراما + وحدة سيفالو + اشعة مقطعية على الاسنان + يقوم بعمل صور مجسمة للرأس ، الجهاز ديجيتال
|
| |
| PointNix Point 3D Combi 500C Dental Imaging |
 |
The premium for professional functionality & technology
FOV
Point 3D Combi 500C is the most affordable dental CT with reasonable large and various choice of FOV. It offers various FOV: 10X9 cm, 12X9 cm, 14X9 cm, 16X9 cm, and 19X16cm to suite yours need. These various FOV extend the areas of diagnosis. Within this range, you can freely select the region of interest and size the FOV accordingly based on the need or purpose of diagnosis.
This revolutionary function improves the accuracy and efficiency of diagnosis. Furthermore, Point 3D Combi 500C considers the convenience of users by defining the typical FOV from small to large - 10X9cm to 19X16cm.
 |  | |
FOV 10x9 cm
With an FOV of 10X9cm, you can minimize the exposure dose of patient and obtain a detailed image of the area you want in a very short time. | FOV 12x9 cm or 14X9 cm
With an FOV of 12X9cm or 14X9cm, you can obtain information over the whole arch. Also, you can select area you want through the various capture mode; Upper & Lower jaw, TMJ, occlusion. The flexible capture mode also contributes to reducing patient dose. | |
 |  | |
FOV 16x9 cm
With an FOV of 16X9cm, the status of the entire dental arch is determine in just one scan for implant surgery. More accurate and safer placement of implants can be achieved by obtaining anatomical information on the inside of the maxillary sinus. | FOV 19x16 cm
With an FOV of 19X16cm, you can obtain detailed anatomical of the maxillofacial image including both TMJ and sinus with just one scan. | |
The Most Advanced Image Quality
Point 3D Combi 500C offers the extended range voxel size. You can efficiently select voxel sizes based on the FOV size.
These flexible voxel sizes enhance the efficiency of the imaging process giving the freedom to take a diagnostic image of the area of interest.
Also, the smaller voxel size means provides extremely high definition images.
The state-of-the art technology for high-quality images
The most important concept of Point 3D Combi 500C is realizing "the best image quality. Designed to improve the accuracy of diagnosis and quality of treatment, Point 3D Combi 500C unique image processing system raises the level of X-ray imaging.
The Extremely Low X-ray Dosage
It is our philosophy to provide the optimized image quality using reduced X-ray dose. The pulsed type generator reduces radiation by 40~60%, providing improved patient care.
Auto Focusing Technology
Auto Focusing Technology can select the optimized image automatically. Point 3D Combi 500C with Auto Focusing Technology always acquires the optimum images without concerning mal-positioning and untypical patient arch. Even if it cannot be used for the diagnosis, Auto Focusing Technology can be revised automatically.
\
MAR Technology (Metal Artifact Remove Technology)
New technology from PointNix
To obtain ideal 3D images, PointNix has improved the MAR system offering superior diagnostics to modern dentistry.
Aritifacts arising from metal objects can cause significant problems in the image quality of adjacent structures and prevent accurate diagnosis.
PointNix newly developed MAR technology (Metal Artifact Remove Technology) minimizes artifacts providing excellent image quality.
One Shot Cephalometric System
1) Exposure time : 0.8 sec
No image distortion / No motion artifact with reduced x-ray exposure time
2) High sensitivity
New area sensor offers twice as much sensitivity than film sensors. This enables orthodontic specialists to have the very best images, never seen before.
 |
|
|
|
|
تعليقات
إرسال تعليق